The new PhoenixMiner beta version with ETCHash support is ready.
You can download PhoenixMiner 5.5b from here:
The file contains the link to download the .zip archive and the password (
phoenix) to unlock it.
Inside the archive you will find a file README.txt with installation instructions.
Make sure to replace the pool and wallet address by what you’re using in all files.
- Added native kernels for AMD RX6800 and RX6900 GPUs. These are faster than the generic kernels and produce a lot less stale shares
- Updated kernels for AMD Polaris, Vega and Navi GPUs that are slightly faster and use less power than before when mining ETH. To use these updated kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux
- The Nvidia mining cards (P106, P104, etc.) can now use straps and hardware control options (power limit, memory overclock, max temperature, etc.) under Windows
- Added support for AMD Linux drivers 20.45-1164792 and 20.45-1188099. Use this drivers only if you have RX6800 or RX6900 GPU. WARNING: Vega and Navi GPUs wont' work with these drivers!
- Automatically set
-tmaxwhen the later is not supported by the driver. This will throttle down the GPUs when they reach the specified temperature to avoid overheating
Note that the AMD Windows drivers do not support compute mode for Hawaii cards, so the hashrate will be quite low (14-15 MH/s with the current ETH DAG epoch). This problem is fixed under Linux, where you can get the full 29-30 MH/s speed out of the Hawaii cards.